Call 1-800-424-5555 or visit http://www.callbeforeyoudig.com at least two (2) days before you intend to dig.Call 1-800-424-5555 or visit http://www.callbeforeyoudig.com
Tap water providers and bottled water providers must meet the same water quality standards. In fact, tap water providers are required to conduct more frequent water quality testing and reporting than bottled water providers. Some consumers prefer the taste of bottled water, and some choose bottled water because they have special health needs. But tap water is a much better deal at costs of 1,000 times less than bottled water.
According to the United States Environmental Protection Agency, home treatment units are rarely necessary for health reasons. Most often, water treatment units are used to remove substances that affect the aesthetic qualities of the water. If you do choose to install a home treatment unit, it is important to follow the manufacturer’s maintenance instructions, because improperly maintained units can actually cause water quality problems.
The hardness of water varies with the water’s source. The choice to buy a softener is an aesthetic one, since hard water is not harmful to health. However, water softeners typically increase the sodium content of the water, a factor that should be considered by people on low-sodium diets.
The most common cause of odor in hot water is the water heater. If your cold water smells fine, check your water heater to ensure that the temperature setting is correct. Water heaters also need to be maintained (see manufacturer’s instructions). Please contact us if the odor persists or if it is present in both the hot and cold water.
Color in water is usually caused by naturally occurring organic matter, minerals, or mineral build-up in the pipes. We flush our water system regularly to clean mineral build-up and other sediment from the pipes. If you receive discolored water, you should let your faucets run until the water is clear. Such substances typically do not pose a health hazard; however, we ask that you please report any instances of discolored water so that we may investigate.
Spots are caused by hard water, or minerals that remain after the water has evaporated. Spots can be eliminated through use of a dishwasher rinse agent.
Clean your coffee maker with vinegar and water as directed by the manufacturer.
We conduct regular water system flushing to remove any mineral build-up and sediment from the pipes and also to ensure that water circulates adequately throughout the system. Fire hydrants may also be opened to conduct fire-flow capability tests.
A milky or cloudy appearance is usually caused by air bubbles in the water, which pose no health risk. If the water is allowed to sit, the air will dissipate and the water will clear. If the cloudiness does not disappear, please contact us so that we may investigate.
Dirt or sand can occur naturally in groundwater or as a result of a water line repair. We try to reduce the instances of dirt or sand in the water through regular flushing, which improves water quality by increasing the circulation of water in the pipes and removing most of the sediment from the water.